GFCI and AFCI Protection
What is a GFCI? Continue Reading
A semi-detached house inspection includes a Free Thermal Scan to help find water leaks.
We start on the outside of the house and inspect the roof for any signs of missing shingles, old age or areas vulnerable to leakage. Then we work around the home and inspect the foundation, grading, windows, walls, chimney, gutters, electrical, decks and air conditioner.
Once inside, the electrical panel is the next stop and we are looking for any signs of improper installation like double taps or undersized wires. This is where you’re informed of the location of the main disconnect switch and it’s amperage.
A typical semi-detached house will have some type of furnace. Whether it’s a high efficiency gas furnace, propane furnace or boiler, we inspect them all. A furnace can last anywhere between 18 to 25 years and sometimes even longer depending on the maintenance and care it receives.
Each home will have a water heater. Most often it’s a tank with a fuel source such as gas or even electricity. More often homeowners are now choosing to go the tankless route to save on energy.
After all this, we locate the main water shut off and inform the buyers of its location.
Now that some large items have been inspected, we work our way through the basement, inspecting for any signs of structural movement, significant cracks in the foundation, or water leakage.
After inspecting the basement, we travel through each floor inspecting the electrical, plumbing, heating/cooling, and windows in each room. During this time, the whole interior of the house is scanned with a thermal camera (also known as Infrared). Thermal cameras can help find missing insulation or water leakage that isn’t easily seen. If we see a suspicious reading it’s checked with a moisture meter to confirm whether or not moisture is present.
Finally we inspect the attic. Most homeowners don’t spend too much time up there and sometimes decades have passed since the last time the attic hatch was opened. But, it’s very important to make sure it’s healthy. A good attic will have plenty of insulation and ventilation which helps keep your energy bills low and deters mould growth.
A typical semi-detached home inspection takes roughly 2 hours to perform. At this time you have an opportunity to ask any questions you may have that weren’t answered during the inspection. CastleTech inspectors are happy to answer any questions!
The report will be sent as a PDF to your email with photos, illustration, defects and descriptions.
This is just a brief summary of what’s involved in a home inspection for a semi-detached property. The list of actual items inspected is much longer! Our goal is to inform you of significant issues that potential homeowners should be aware of before deciding to purchase a home. We want homeowners to be informed so they can comfortably move forward with their purchase.
Proudly serving Newmarket home inspection, Aurora home inspection, Richmond hill home inspection, Markham home inspection, Vaughan home inspection, Toronto home inspection, North York home inspection, Scarborough home inspection, Pickering home inspection, Oshawa home inspection, Whitby home inspection, Mississauga home inspection, Etobicoke home inspection, Burlington home inspection, Oakville home inspection, Hamilton home inspection, Keswick home inspection, Sharon home inspection, Bradford home inspection, Barrie home inspection, Best home inspection, Best home inspector
What is a GFCI? Continue Reading
Clothes dryers are often neglected by the homeowner. It’s easy to forget about it as long as it’s still doing its job of dryer clothes. Continue Reading