(416) 621-8009

Are you concerned about Mould or Mold in your home?

Find out if mould is growing in your home with air samples, surface samples or a full Mould Inspection. All of the samples are sent to a laboratory for analysis and you will receive a report with the types of mould found and descriptions of the moulds.

Don’t let mould destroy your home or compromise you health!

Air Samples (with lab report)

Typically when it comes to air samples. Three samples are taken, two from the outside and one from the area of concern inside the building or the most commonly used area.

Mould spores are everywhere in nature and comparing the inside and outside samples gives us a baseline. If mould spores are found inside the home that aren’t found outside or they are in much higher numbers. There may be mould growing in the home.

Surface Samples (with lab report)

Different types of mould can vary in colour and look. If you aren’t sure what you see is mould a surface sample can identify what type of mould it is.

Full Mould Inspection (with lab report)

A Full Mould Inspection is the same a typical home inspection with the added benefit of air sampling.

The roof, attic, insulation, exterior, interior, structure, plumbing, electrical and both HVAC systems will be inspected. A thermal (infrared) camera and moisture meter will be used and any signs of moisture will be noted in the Mould Inspection Report.

Air samples will be taken and once they are analyzed a lab report will be sent to you identifying the types of mould present.

CastleTech Inspections is Unbiased towards the results and will simply report the findings because I do not remediate or remove. Call today to Book!

mold mould inspection

Air sampling for mould

  • Air sampling $200 (+$75 for each additional sample)
  • Air sampling add-on during home inspection $150 (+$75 for each additional sample)

Surface sampling for mould 

  • Surface sample $200 for one sample  (+$75 for each additional sample)
  • Surface sample add-on during home inspection $150 for one sample (+$75 for each additional sample)

Full Mould Inspection

  • Condo starting at $300 + mould fees (see above)
  • Townhouse starting at $350 + mould fees (see above)
  • Semi starting at $375 + mould fees (see above)
  • Detached starting at $400 + Mould fees (see above)

Samples are sent to a third party testing laboratory and lab reports are delivered within 2 business days. Faster lab reports available (rush service fees will apply).

Contact me direct and anytime at Adam@CastleTechInspections.ca or 416-621-8009.

Proudly serving Newmarket mould inspection, Aurora mould inspection, Richmond hill mould inspection, Markham mould inspection, Vaughan mould inspection, Toronto mould inspection, North York mould inspection, Scarborough mould inspection, Pickering mould inspection, Oshawa mould inspection, Whitby mould inspection, Mississauga mould inspection, Etobicoke mould inspection, Burlington mould inspection, Oakville mould inspection, Hamilton mould inspection, Keswick mould inspection, Sharon mould inspection, Bradford mould inspection, Barrie mould inspection, Best mould inspection, Best mould inspector, mould testing, mould inspector, mold testing, mold inspector, mold inspection

Call Now ButtonLET'S TALK!